Seal Row Barbell 9011/2 is a 160 cm long, 15 kg curved barbell specifically designed for the 9021 bench.

The camber (curvature) allows greater freedom of movement because it shifts the interference point between the barbell and bench by a good twenty centimetres.

The knurl does not touch the floor if the barbell is resting on the bench's barbell supports, or if used with bumper discs. The deep, volcano-shaped knurl, 26 cm long, is positioned in such a way as to signal to the athlete that a further tight grip, i.e. beyond the end of the knurl, will interfere with the barbell supports if one intends to finish the exercise by repositioning the barbell on the supports, instead of finishing it, as recommended, with the barbell on the floor.

DISC STOPS NOT INCLUDED

see also: bench 9021.

SEAL ROW BARBELL TECHNICAL SPECIFICATIONS

Video exercises:

BARBELL SELECTION GUIDE

We produce a wide range of barbells that can be divided into three categories: Olympic, Hybrid, Specialised.

1- Olympians 

Olympic weightlifting barbells, or weightlifting barbells, built to IWF standards.

• Top of the range are the two PREMIUM models with chrome bars in black: 9015/4 MALE, 9015/5 FEMALE.These are barbells made of steel with high tensile values, which adopt the best construction solutions for snatch and sprint exercises and the associated falls on the platform.As with all our Olympic barbells, the knurling is medium, suitable for training, especially with regard to hand health. Two models called TRAINING complete the range: 9015/4C H-PERFORMANCE and 9015/8. These barbells are designed to achieve the best possible balance between usage requirements, construction quality and production costs. The 9015/4C is the model with the highest-performance steel and the same equipment inside the collars as the premium barbell. The 9015/8, on the other hand, is the model with lower performance characteristics, because bars with high tensile values and high production costs are not always required. For this reason, the data sheet of the barbell also shows the maximum loads per type of operation. The 9015/9 OLYMPIC CROSSFIT® BALANCE BAR: this is a barbell with high production costs because it is built for high repetition weightlifting, with a very high 'dropping stress' and with numerous solutions specifically designed for cross training.

2- Hybrids

• In this category we find two barbells: 9015/3 BARBELL TRAINING 185 and 9014 BARBELL TRAINING 140.

These barbells have the main characteristics of Olympic barbells, from which they differ in their overall length: 185 and 140 cm precisely. These differences are useful in terms of size and training, as these barbells are high-performance and extremely versatile thanks to their shorter bar length.

3- Specialists

The category of specialised barbells is numerous in that each barbell is designed in response to specific technical training and usage requirements.

• 9015 OLYMPIC POWERLIFTING BARBELLborn in our gym, it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the usual 29 mm.
• 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed on the basis of the technical rules dictated by the IPF, it is characterised by its high build quality.
• 9015/7 BARBELL AXLE 50: barbell with a very large diameter handle, 51 mm, useful in athletic training programmes.
• 9014/1 LIGHTWEIGHT ALUMINIUM BARBELL e 9015/1 INTRODUCTORY LIGHT BARBELLThese are two lightweight barbells that are useful when learning weightlifting techniques; snatch and momentum. The first is a true technical light barbell, while the second is an economical solution that is also useful for having several barbells for group training and classes.
• 9027 EZ ANGULAR BALANCER and 9027P EZ PREMIUM ANGLED BARBELL: classic angled barbells for training biceps. Effective and spartan the former, with bearings and a superior finish the latter. SEE COMPARATIVE.
• 9011/1 SAFETY SQUAT BARBELL: a barbell with shoulder straps useful in circumventing certain joint mobility limitations that would impair the ability to perform squats. In terms of variation in training, it is worth noting how the high load control positively affects the versatility of the equipment, which lends itself to performing lunges, single leg exercises, bulgarian squats, step ups, etc.
• 8710-8745 Pre-loaded balances and 8610-8645 EZ preloaded berbellThese are two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of physical culture because the preloaded barbells allow for maximum ease of use, especially in step sets, super sets and all similar techniques without breaks between exercise series.
• 9027/1 TRICEPS BARThis is an imaginative barbell, designed for training triceps, which offers the possibility of performing alternative holds to traditional barbells.
• 9012 Olympic Hex Bar, 9012/1 Super Hex Bar, 9012/2 Olympic Hex Bar Compact, 9012/3 Low Hex Bar, 9012/4 Open Hex Bar:  these are different interpretations of the hexagonal bar, developed to meet different usage requirements. The 9012 Olympic Hex Bar is a classic hex bar, featuring 40 cm long loading sleeves, which are also suitable for wide-shouldered discs. The 9012/1 Super Hex Bar offers a more articulated configuration: in addition to the raised disc holders, which facilitate loading and unloading, it is equipped with a multi-diameter rotating grip. On the other hand, the 9012/2 Olympic Hex Bar Compact is a traditional hex bar in a more compact version, with sleeve lengths of 32 cm. The 9012/3 Low Hex Bar is a quadra bar sui generis, designed for specific athletic training and to guarantee a high degree of freedom of movement in all planes, with particular reference to the depth of lunges and squats. The discs are horizontally oriented. The 9012/4 Open Hex Bar, an evolution of its predecessor, is designed for a wider and more transversal use, with particular attention to compactness, practicality of use and operational versatility.
• 9026 FARMER WALK BARSborn for walking with weights in hand, they turned out to be practical multi-purpose barbells with a 50 mm grip and small footprint.
• 9011/2 Seal Row Barbell: Specifically designed bench press 9021 SEAL ROW BENCH

WEIGHTLIFTING/POWERLIFTING BARBELLS

PREMIUM MALE OLYMPIC BARBELL- Code 9015/4

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting

Find out more

PREMIUM FEMALE OLYMPIC BARBELL- Code 9015/5

WEIGHT	15 Kg
Length	2010 mm
Grip length	1310 mm
diameter of grip part	25 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	320 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	580 Kg
use	Weightlifting

Find out more

OLYMPIC TRAINING BARBELLS H-PERFORMANCE - Code 9015/4c

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting / Multi-purpose

Find out more

OLYMPIC TRAINING BARBELL - Code 9015/8

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 185 - Code 9015/3

WEIGHT	14 Kg
Length	1850 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	250 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 140 - Code 9014

WEIGHT	10 Kg
Length	1400 mm
Grip length	1003 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

OLYMPIC BARBELL FOR CROSSFIT® - Code 9015/9

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Volcano Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 242,350
static loading capacity	1000 Kg
use	Cross training / Weightlifting

More

OLYMPIC POWERLIFTING BARBELL - Code 9015

WEIGHT	20 Kg
Length	2208 mm
Grip length	1329 mm
diameter of grip part	32 mm
Load adapters (collars)	Rotating
equipment	2 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Media
centre section bar	With knurling 20 cm
Marker	810 mm (Powerlifting) and 910 mm (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 70,000
static loading capacity	650 Kg
indicative maximum load	Deadlift: 300 Kg Squat250 Kg Snatch/Clean & Jerk200 kg
use	Powerlifting

Find out more

COMPETITION POWERLIFT BAR 29 mm - Code 9015/2

WEIGHT	20 Kg
LENGTH	2200 mm
GRIP LENGTH	1310 mm
DIAMETER OF GRIP PART	29 mm
LOAD ADAPTERS (COLLARS)	Rotating (disc stop collars 12 mm)
EQUIPMENT	4 bushings
CLAMPING SYSTEM	4 seeger
DIAMETER LOAD ADAPTERS	50 mm
LENGTH LOAD ADAPTERS	433 mm
ZIGRINKING	Deep volcano, crossed 30°
CENTRE SECTION BAR	knurling
MARKER	810 mm
BAR SURFACE TREATMENT	Hard Chrome
STEEL BAR	Special, reclaimed bond
BAR TENSILE STRENGTH	Tensile Strength PSI 242,350
STATIC LOADING CAPACITY	2000 Kg
USE	Powerlifting

Find out more

AXLE 50 BARBELL- Code 9015/7

WEIGHT	20 Kg
Length	2120 mm
Grip length	1310 mm
diameter of grip part	50 mm
Load adapters (collars)	Non-rotating
diameter load adapters	50 mm
length load adapters	390 mm
knurling	No
Marker	No
bar surface treatment	Micaceous paint
steel bar	Standard
static loading capacity	300 kg
use	Athletic training, Powerlifting

Find out more

LIGHT ALUMINUM BARBELL - Code 9014/1

WEIGHT	7 Kg
Length	1836 mm
Grip length	1315 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	2 seeger
diameter load adapters	50 mm
length load adapters	243 mm
knurling	Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar	Aluminium
static loading capacity	100 Kg
indicative maximum load	Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
use	Weightlifting - No tight grip, no drop

Find out more

INTRODUCTIVE LIGHT BARBELL - Code 9015/1

WEIGHT	3.5 Kg
Length	1680 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Fixed
diameter load adapters	50 mm
length load adapters	195 mm
knurling	No
Marker	910 mm (Weightlifting)
bar	Steel
static loading capacity	100 Kg
indicative maximum load	Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk40 kg
use	Weightlifting - No tight grip, no drop

Find out more

ANGLE-EZ PREMIUM BARBELL- Code 9027P

WEIGHT	9 Kg
Length	1205 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	2 bearings, 2 bushings
clamping system	Seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Hard Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

ANGULAR BARBELL -EZ - Code 9027

WEIGHT	9 Kg (tolerance 3%)
Length	1200 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating and floating
equipment	4 bushings
clamping system	Bolt
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

TRICEPS BAR - Code 9027/1

WEIGHT	9 Kg
Length	915 mm
diameter rubberized handles	35 mm
diameter load adapters	50 mm
length load adapters	170 mm
bar surface treatment	Chrome
steel bar	Standard
use	Physical culture

Find out more

SAFETY SQUAT BARBELL - Code 9011/1

WEIGHT	24 Kg
Length	2270 mm
Grip length	1300 mm
diameter of grip part	30 mm
distance between handles	400 mm
Load adapters (collars)	Rotating, equipped with bearings
diameter load adapters	50 mm
knurling	Media
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome, painted black
static loading capacity	300 kg
use	Training

Find out more

OLYMPIC HEX BAR - Code 9012

WEIGHT	31 Kg
Total length	1750 mm
diameter load adapters	50 mm
length load adapters	400 mm
Handle diameter	28 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

SUPER HEX BAR - Code 9012/1

WEIGHT	28 Kg
Total length	1900 mm
diameter load adapters	26 / 50 mm
length load adapters	400 mm
Handle diameter	25 / 38 / 50 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

OLYMPIC HEX BAR COMPACT - Code 9012/2

WEIGHT	28.5 Kg
Total length	1590 mm
diameter load adapters	50 mm
length load adapters	330 mm
Handle diameter	28 mm
bar surface treatment	Nickel-phosphorus alloy
static loading capacity	400 Kg

Find out more

LOW HEX BAR - Code 9012/3

WEIGHT	20 Kg
Total length	1720 mm
diameter load adapters	50 mm
length load adapters	300 mm
Rubberized handle diameter	35 mm
static loading capacity	600 kg

Find out more

OPEN HEX BAR - Code 9012/4

Find out more

SEAL ROW BARBELL - Cod 9011/2

Find out more

SUPER PUMP BARBELL- Code 1660

More

SUPER PUMP IRON BARBELL - Code 1660/1

More

PREMIUM MALE OLYMPIC BARBELL- Code 9015/4

WEIGHT	22 Kg
Total length	1862 mm
diameter load adapters	50 mm
length load adapters	400 mm
Handle diameter	29 mm
static loading capacity	600 kg
WEIGHT	15 Kg
LENGTH	1600 mm
GRIP LENGTH	1025 mm
DIAMETER OF GRIP PART	28 mm
EQUIPMENT	4 Bushings
LOAD ADAPTERS (COLLARS)	Rotating
CLAMPING SYSTEM	Seeger
DIAMETER LOAD ADAPTERS	50 mm
LENGTH LOAD ADAPTERS	255 mm
ZIGRINKING	Deep flattened diamond
CENTRE SECTION BAR	Cambered - 200mm
BAR SURFACE TREATMENT	Chrome
STEEL BAR	Standard
STATIC LOADING CAPACITY	300 kg
USE	Seal Row Exercise
WEIGHT	2 Kg
Length	1320 mm
Grip length	876 mm
diameter of grip part	35 mm
Load adapters (collars)	Fixed
diameter load adapters	28 mm
length load adapters	210 mm
knurling	No
Marker	No
indicative maximum load	50 Kg
use	Super Pump Training
WEIGHT	1 Kg
Length	1320 mm
Grip length	880 mm
diameter of grip part	28 mm
Load adapters (collars)	Fixed
diameter load adapters	28 mm
length load adapters	210 mm
knurling	No
Marker	No
indicative maximum load	50 Kg
use	Super Pump Training

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting

Find out more

PREMIUM FEMALE OLYMPIC BARBELL- Code 9015/5

WEIGHT	15 Kg
Length	2010 mm
Grip length	1310 mm
diameter of grip part	25 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	320 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	580 Kg
use	Weightlifting

Find out more

OLYMPIC TRAINING BARBELLS H-PERFORMANCE - Code 9015/4c

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting / Multi-purpose

Find out more

OLYMPIC TRAINING BARBELL - Code 9015/8

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 185 - Code 9015/3

WEIGHT	14 Kg
Length	1850 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	250 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 140 - Code 9014

WEIGHT	10 Kg
Length	1400 mm
Grip length	1003 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

OLYMPIC BARBELL FOR CROSSFIT® - Code 9015/9

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Volcano Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 242,350
static loading capacity	1000 Kg
use	Cross training / Weightlifting

More

OLYMPIC POWERLIFTING BARBELL - Code 9015

WEIGHT	20 Kg
Length	2208 mm
Grip length	1329 mm
diameter of grip part	32 mm
Load adapters (collars)	Rotating
equipment	2 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Media
centre section bar	With knurling 20 cm
Marker	810 mm (Powerlifting) and 910 mm (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 70,000
static loading capacity	650 Kg
indicative maximum load	Deadlift: 300 Kg Squat250 Kg Snatch/Clean & Jerk200 kg
use	Powerlifting

Find out more

COMPETITION POWERLIFT BAR 29 mm - Code 9015/2

WEIGHT	20 Kg
LENGTH	2200 mm
GRIP LENGTH	1310 mm
DIAMETER OF GRIP PART	29 mm
LOAD ADAPTERS (COLLARS)	Rotating (disc stop collars 12 mm)
EQUIPMENT	4 bushings
CLAMPING SYSTEM	4 seeger
DIAMETER LOAD ADAPTERS	50 mm
LENGTH LOAD ADAPTERS	433 mm
ZIGRINKING	Deep volcano, crossed 30°
CENTRE SECTION BAR	knurling
MARKER	810 mm
BAR SURFACE TREATMENT	Hard Chrome
STEEL BAR	Special, reclaimed bond
BAR TENSILE STRENGTH	Tensile Strength PSI 242,350
STATIC LOADING CAPACITY	2000 Kg
USE	Powerlifting

Find out more

AXLE 50 BARBELL- Code 9015/7

WEIGHT	20 Kg
Length	2120 mm
Grip length	1310 mm
diameter of grip part	50 mm
Load adapters (collars)	Non-rotating
diameter load adapters	50 mm
length load adapters	390 mm
knurling	No
Marker	No
bar surface treatment	Micaceous paint
steel bar	Standard
static loading capacity	300 kg
use	Athletic training, Powerlifting

Find out more

LIGHT ALUMINUM BARBELL - Code 9014/1

WEIGHT	7 Kg
Length	1836 mm
Grip length	1315 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	2 seeger
diameter load adapters	50 mm
length load adapters	243 mm
knurling	Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar	Aluminium
static loading capacity	100 Kg
indicative maximum load	Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
use	Weightlifting - No tight grip, no drop

Find out more

INTRODUCTIVE LIGHT BARBELL - Code 9015/1

WEIGHT	3.5 Kg
Length	1680 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Fixed
diameter load adapters	50 mm
length load adapters	195 mm
knurling	No
Marker	910 mm (Weightlifting)
bar	Steel
static loading capacity	100 Kg
indicative maximum load	Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk40 kg
use	Weightlifting - No tight grip, no drop

Find out more

ANGLE-EZ PREMIUM BARBELL- Code 9027P

WEIGHT	9 Kg
Length	1205 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	2 bearings, 2 bushings
clamping system	Seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Hard Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

ANGULAR BARBELL -EZ - Code 9027

WEIGHT	9 Kg (tolerance 3%)
Length	1200 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating and floating
equipment	4 bushings
clamping system	Bolt
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

TRICEPS BAR - Code 9027/1

WEIGHT	9 Kg
Length	915 mm
diameter rubberized handles	35 mm
diameter load adapters	50 mm
length load adapters	170 mm
bar surface treatment	Chrome
steel bar	Standard
use	Physical culture

Find out more

SAFETY SQUAT BARBELL - Code 9011/1

WEIGHT	24 Kg
Length	2270 mm
Grip length	1300 mm
diameter of grip part	30 mm
distance between handles	400 mm
Load adapters (collars)	Rotating, equipped with bearings
diameter load adapters	50 mm
knurling	Media
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome, painted black
static loading capacity	300 kg
use	Training

Find out more

OLYMPIC HEX BAR - Code 9012

WEIGHT	31 Kg
Total length	1750 mm
diameter load adapters	50 mm
length load adapters	400 mm
Handle diameter	28 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

OLYMPIC HEX BAR COMPACT - Code 9012/2

WEIGHT	28.5 Kg
Total length	1590 mm
diameter load adapters	50 mm
length load adapters	330 mm
Handle diameter	28 mm
bar surface treatment	Nickel-phosphorus alloy
static loading capacity	400 Kg

Find out more

LOW HEX BAR - Code 9012/3

WEIGHT	20 Kg
Total length	1720 mm
diameter load adapters	50 mm
length load adapters	300 mm
Rubberized handle diameter	35 mm
static loading capacity	600 kg

Find out more

SUPER HEX BAR - Code 9012/1

WEIGHT	28 Kg
Total length	1900 mm
diameter load adapters	26 / 50 mm
length load adapters	400 mm
Handle diameter	25 / 38 / 50 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

SEAL ROW BARBELLl - Cod 9011/2

WEIGHT	15 Kg
LENGTH	1600 mm
GRIP LENGTH	1025 mm
DIAMETER OF GRIP PART	28 mm
EQUIPMENT	4 Bushings
LOAD ADAPTERS (COLLARS)	Rotating
CLAMPING SYSTEM	Seeger
DIAMETER LOAD ADAPTERS	50 mm
LENGTH LOAD ADAPTERS	255 mm
ZIGRINKING	Deep flattened diamond
CENTRE SECTION BAR	Cambered - 200mm
BAR SURFACE TREATMENT	Chrome
STEEL BAR	Standard
STATIC LOADING CAPACITY	300 kg
USE	Seal Row Exercise

Find out more

SUPER PUMP BARBELL- Code 1660

WEIGHT	2 Kg
Length	1320 mm
Grip length	876 mm
diameter of grip part	35 mm
Load adapters (collars)	Fixed
diameter load adapters	28 mm
length load adapters	210 mm
knurling	No
Marker	No
indicative maximum load	50 Kg
use	Super Pump Training

More

SUPER PUMP IRON BARBELL - Code 1660/1

WEIGHT	1 Kg
Length	1320 mm
Grip length	880 mm
diameter of grip part	28 mm
Load adapters (collars)	Fixed
diameter load adapters	28 mm
length load adapters	210 mm
knurling	No
Marker	No
indicative maximum load	50 Kg
use	Super Pump Training

More