A complete range of barbells for every type of training. Olympic, hybrid and specialised barbells; for weight training, powerlifting, physical culture, cross training. Pre-loaded barbells, hexagonal bars, EZ angled bars and super pump bars also belong to this category.

BARBELL SELECTION GUIDE

We produce a wide range of barbells that can be divided into three categories: Olympic, Hybrid, Specialised.

1- Olympians 

Olympic weightlifting barbells, or weightlifting barbells, built to IWF standards.
  • Top of the range are the two PREMIUM models with chrome bars in black: 9015/4 MALE, 9015/5 FEMALE.These are barbells made of steel with high tensile values, which adopt the best construction solutions for snatch and sprint exercises and the associated falls on the platform.As with all our Olympic barbells, the knurling is medium, suitable for training, especially with regard to hand health. Two models called TRAINING complete the range: 9015/4C H-PERFORMANCE and 9015/8. These barbells are designed to achieve the best possible balance between usage requirements, construction quality and production costs. The 9015/4C is the model with the highest-performance steel and the same equipment inside the collars as the premium barbell. The 9015/8, on the other hand, is the model with lower performance characteristics, because bars with high tensile values and high production costs are not always required. For this reason, the data sheet of the barbell also shows the maximum loads per type of operation. The 9015/9 OLYMPIC CROSSFIT® BALANCE BAR: this is a barbell with high production costs because it is built for high repetition weightlifting, with a very high 'dropping stress' and with numerous solutions specifically designed for cross training.

2- Hybrids

  • In this category we find two barbells: 9015/3 BARBELL TRAINING 185 and 9014 BARBELL TRAINING 140.
These barbells have the main characteristics of Olympic barbells, from which they differ in their overall length: 185 and 140 cm precisely. These differences are useful in terms of size and training, as these barbells are high-performance and extremely versatile thanks to their shorter bar length.

3- Specialists

The category of specialised barbells is numerous in that each barbell is designed in response to specific technical training and usage requirements.
  • 9015 OLYMPIC POWERLIFTING BARBELLborn in our gym, it is an atypical Olympic barbell with a bar diameter of 32 mm instead of the usual 29 mm.
  • 9015/2 COMPETITION POWERLIFT BARBELL 29 mm: designed on the basis of the technical rules dictated by the IPF, it is characterised by its high build quality.
  • 9015/7 BARBELL AXLE 50: barbell with a very large diameter handle, 51 mm, useful in athletic training programmes.
  • 9014/1 LIGHTWEIGHT ALUMINIUM BARBELL e 9015/1 INTRODUCTORY LIGHT BARBELLThese are two lightweight barbells that are useful when learning weightlifting techniques; snatch and momentum. The first is a true technical light barbell, while the second is an economical solution that is also useful for having several barbells for group training and classes.
  • 9027 EZ ANGULAR BALANCER and 9027P EZ PREMIUM ANGLED BARBELL: classic angled barbells for training biceps. Effective and spartan the former, with bearings and a superior finish the latter. SEE COMPARATIVE.
  • 9011/1 SAFETY SQUAT BARBELL: a barbell with shoulder straps useful in circumventing certain joint mobility limitations that would impair the ability to perform squats. In terms of variation in training, it is worth noting how the high load control positively affects the versatility of the equipment, which lends itself to performing lunges, single leg exercises, bulgarian squats, step ups, etc.
  • 8710-8745 Pre-loaded balances and 8610-8645 EZ preloaded berbellThese are two sets of 10-45 kg preloaded barbells, consisting of 10 barbells per set. A classic of physical culture because the preloaded barbells allow for maximum ease of use, especially in step sets, super sets and all similar techniques without breaks between exercise series.
  • 9027/1 TRICEPS BARThis is an imaginative barbell, designed for training triceps, which offers the possibility of performing alternative holds to traditional barbells.
  • 9012 Olympic Hex Bar, 9012/1 Super Hex Bar, 9012/2 Olympic Hex Bar Compact, 9012/3 Low Hex Bar, 9012/4 Open Hex Bar:  these are different interpretations of the hexagonal bar, developed to meet different usage requirements. The 9012 Olympic Hex Bar is a classic hex bar, featuring 40 cm long loading sleeves, which are also suitable for wide-shouldered discs. The 9012/1 Super Hex Bar offers a more articulated configuration: in addition to the raised disc holders, which facilitate loading and unloading, it is equipped with a multi-diameter rotating grip. On the other hand, the 9012/2 Olympic Hex Bar Compact is a traditional hex bar in a more compact version, with sleeve lengths of 32 cm. The 9012/3 Low Hex Bar is a quadra bar sui generis, designed for specific athletic training and to guarantee a high degree of freedom of movement in all planes, with particular reference to the depth of lunges and squats. The discs are horizontally oriented. The 9012/4 Open Hex Bar, an evolution of its predecessor, is designed for a wider and more transversal use, with particular attention to compactness, practicality of use and operational versatility.
  • 9026 FARMER WALK BARSborn for walking with weights in hand, they turned out to be practical multi-purpose barbells with a 50 mm grip and small footprint.
  • 9011/2 Seal Row Barbell: Specifically designed bench press 9021 SEAL ROW BENCH

WEIGHTLIFTING/POWERLIFTING BARBELLS

WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 415 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome Black
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 700 Kg
use Weightlifting
Find out more
WEIGHT 15 Kg
Length 2010 mm
Grip length 1310 mm
diameter of grip part 25 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 320 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome Black
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 580 Kg
use Weightlifting
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 415 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 700 Kg
use Weightlifting / Multi-purpose
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 14 Kg
Length 1850 mm
Grip length 1280 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 250 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 10 Kg
Length 1400 mm
Grip length 1003 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 165 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 4 ball bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Volcano Media
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 242,350
static loading capacity 1000 Kg
use Cross training / Weightlifting
More
WEIGHT 20 Kg
Length 2208 mm
Grip length 1329 mm
diameter of grip part 32 mm
Load adapters (collars) Rotating
equipment 2 needle roller bearings, 4 ball bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Media
centre section bar With knurling 20 cm
Marker 810 mm (Powerlifting) and 910 mm (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 70,000
static loading capacity 650 Kg
indicative maximum load Deadlift: 300 Kg Squat250 Kg Snatch/Clean & Jerk200 kg
use Powerlifting
Find out more
WEIGHT 20 Kg
LENGTH 2200 mm
GRIP LENGTH 1310 mm
DIAMETER OF GRIP PART 29 mm
LOAD ADAPTERS (COLLARS) Rotating (disc stop collars 12 mm)
EQUIPMENT 4 bushings
CLAMPING SYSTEM 4 seeger
DIAMETER LOAD ADAPTERS 50 mm
LENGTH LOAD ADAPTERS 433 mm
ZIGRINKING Deep volcano, crossed 30°
CENTRE SECTION BAR knurling
MARKER 810 mm
BAR SURFACE TREATMENT Hard Chrome
STEEL BAR Special, reclaimed bond
BAR TENSILE STRENGTH Tensile Strength PSI 242,350
STATIC LOADING CAPACITY 2000 Kg
USE Powerlifting
Find out more
WEIGHT 20 Kg
Length 2120 mm
Grip length 1310 mm
diameter of grip part 50 mm
Load adapters (collars) Non-rotating
diameter load adapters 50 mm
length load adapters 390 mm
knurling No
Marker No
bar surface treatment Micaceous paint
steel bar Standard
static loading capacity 300 kg
use Athletic training, Powerlifting
Find out more
WEIGHT 7 Kg
Length 1836 mm
Grip length 1315 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 2 seeger
diameter load adapters 50 mm
length load adapters 243 mm
knurling Media
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar Aluminium
static loading capacity 100 Kg
indicative maximum load Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
use Weightlifting - No tight grip, no drop
Find out more
WEIGHT 3.5 Kg
Length 1680 mm
Grip length 1280 mm
diameter of grip part 28 mm
Load adapters (collars) Fixed
diameter load adapters 50 mm
length load adapters 195 mm
knurling No
Marker 910 mm (Weightlifting)
bar Steel
static loading capacity 100 Kg
indicative maximum load Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk40 kg
use Weightlifting - No tight grip, no drop
Find out more
WEIGHT 9 Kg
Length 1205 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 2 bearings, 2 bushings
clamping system Seeger
diameter load adapters 50 mm
length load adapters 165 mm
knurling Media
bar surface treatment Hard Chrome
steel bar Standard
static loading capacity 300 kg
use Physical culture
Find out more
WEIGHT 9 Kg (tolerance 3%)
Length 1200 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating and floating
equipment 4 bushings
clamping system Bolt
diameter load adapters 50 mm
length load adapters 165 mm
knurling Media
bar surface treatment Chrome
steel bar Standard
static loading capacity 300 kg
use Physical culture
Find out more
WEIGHT 9 Kg
Length 915 mm
diameter rubberized handles 35 mm
diameter load adapters 50 mm
length load adapters 170 mm
bar surface treatment Chrome
steel bar Standard
use Physical culture
Find out more
WEIGHT 24 Kg
Length 2270 mm
Grip length 1300 mm
diameter of grip part 30 mm
distance between handles 400 mm
Load adapters (collars) Rotating, equipped with bearings
diameter load adapters 50 mm
knurling Media
Marker 810 mm (Powerlifting)
bar surface treatment Hard Chrome, painted black
static loading capacity 300 kg
use Training
Find out more
WEIGHT 31 Kg
Total length 1750 mm
diameter load adapters 50 mm
length load adapters 400 mm
Handle diameter 28 mm
bar surface treatment Painted black
surface treatment adapters Hard Chrome
static loading capacity 600 kg
Find out more
WEIGHT 28 Kg
Total length 1900 mm
diameter load adapters 26 / 50 mm
length load adapters 400 mm
Handle diameter 25 / 38 / 50 mm
bar surface treatment Painted black
surface treatment adapters Hard Chrome
static loading capacity 600 kg
Find out more
WEIGHT 28.5 Kg
Total length 1590 mm
diameter load adapters 50 mm
length load adapters 330 mm
Handle diameter 28 mm
bar surface treatment Nickel-phosphorus alloy
static loading capacity 400 Kg
Find out more
WEIGHT 20 Kg
Total length 1720 mm
diameter load adapters 50 mm
length load adapters 300 mm
Rubberized handle diameter 35 mm
static loading capacity 600 kg
Find out more
Find out more
Find out more
More
More
WEIGHT 22 Kg
Total length 1862 mm
diameter load adapters 50 mm
length load adapters 400 mm
Handle diameter 29 mm
static loading capacity 600 kg
WEIGHT 15 Kg
LENGTH 1600 mm
GRIP LENGTH 1025 mm
DIAMETER OF GRIP PART 28 mm
EQUIPMENT 4 Bushings
LOAD ADAPTERS (COLLARS) Rotating
CLAMPING SYSTEM Seeger
DIAMETER LOAD ADAPTERS 50 mm
LENGTH LOAD ADAPTERS 255 mm
ZIGRINKING Deep flattened diamond
CENTRE SECTION BAR Cambered - 200mm
BAR SURFACE TREATMENT Chrome
STEEL BAR Standard
STATIC LOADING CAPACITY 300 kg
USE Seal Row Exercise
WEIGHT 2 Kg
Length 1320 mm
Grip length 876 mm
diameter of grip part 35 mm
Load adapters (collars) Fixed
diameter load adapters 28 mm
length load adapters 210 mm
knurling No
Marker No
indicative maximum load 50 Kg
use Super Pump Training
WEIGHT 1 Kg
Length 1320 mm
Grip length 880 mm
diameter of grip part 28 mm
Load adapters (collars) Fixed
diameter load adapters 28 mm
length load adapters 210 mm
knurling No
Marker No
indicative maximum load 50 Kg
use Super Pump Training
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 415 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome Black
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 700 Kg
use Weightlifting
Find out more
WEIGHT 15 Kg
Length 2010 mm
Grip length 1310 mm
diameter of grip part 25 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 320 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome Black
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 580 Kg
use Weightlifting
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 8 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 415 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 200,000
static loading capacity 700 Kg
use Weightlifting / Multi-purpose
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 14 Kg
Length 1850 mm
Grip length 1280 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 250 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 10 Kg
Length 1400 mm
Grip length 1003 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 165 mm
knurling Flattened diamond medium
centre section bar Without knurling
Marker 810 mm (Powerlifting)
bar surface treatment Hard Chrome
steel bar Special
Bar tensile strength Tensile Strength PSI 132,000
static loading capacity 300 kg
indicative maximum load Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use Multi-purpose
Find out more
WEIGHT 20 Kg
Length 2200 mm
Grip length 1310 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 4 ball bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Volcano Media
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 242,350
static loading capacity 1000 Kg
use Cross training / Weightlifting
More
WEIGHT 20 Kg
Length 2208 mm
Grip length 1329 mm
diameter of grip part 32 mm
Load adapters (collars) Rotating
equipment 2 needle roller bearings, 4 ball bearings, 2 bushings
clamping system 4 seeger
diameter load adapters 50 mm
length load adapters 410 mm
knurling Media
centre section bar With knurling 20 cm
Marker 810 mm (Powerlifting) and 910 mm (Weightlifting)
bar surface treatment Hard Chrome
steel bar Special, reclaimed bond
Bar tensile strength Tensile Strength PSI 70,000
static loading capacity 650 Kg
indicative maximum load Deadlift: 300 Kg Squat250 Kg Snatch/Clean & Jerk200 kg
use Powerlifting
Find out more
WEIGHT 20 Kg
LENGTH 2200 mm
GRIP LENGTH 1310 mm
DIAMETER OF GRIP PART 29 mm
LOAD ADAPTERS (COLLARS) Rotating (disc stop collars 12 mm)
EQUIPMENT 4 bushings
CLAMPING SYSTEM 4 seeger
DIAMETER LOAD ADAPTERS 50 mm
LENGTH LOAD ADAPTERS 433 mm
ZIGRINKING Deep volcano, crossed 30°
CENTRE SECTION BAR knurling
MARKER 810 mm
BAR SURFACE TREATMENT Hard Chrome
STEEL BAR Special, reclaimed bond
BAR TENSILE STRENGTH Tensile Strength PSI 242,350
STATIC LOADING CAPACITY 2000 Kg
USE Powerlifting
Find out more
WEIGHT 20 Kg
Length 2120 mm
Grip length 1310 mm
diameter of grip part 50 mm
Load adapters (collars) Non-rotating
diameter load adapters 50 mm
length load adapters 390 mm
knurling No
Marker No
bar surface treatment Micaceous paint
steel bar Standard
static loading capacity 300 kg
use Athletic training, Powerlifting
Find out more
WEIGHT 7 Kg
Length 1836 mm
Grip length 1315 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 4 needle roller bearings, 2 bushings
clamping system 2 seeger
diameter load adapters 50 mm
length load adapters 243 mm
knurling Media
centre section bar Without knurling
Marker 810 mm (Powerlifting) and 910 (Weightlifting)
bar Aluminium
static loading capacity 100 Kg
indicative maximum load Deadlift: 80 Kg Squat: 50 Kg Snatch/Clean & Jerk: 80 Kg
use Weightlifting - No tight grip, no drop
Find out more
WEIGHT 3.5 Kg
Length 1680 mm
Grip length 1280 mm
diameter of grip part 28 mm
Load adapters (collars) Fixed
diameter load adapters 50 mm
length load adapters 195 mm
knurling No
Marker 910 mm (Weightlifting)
bar Steel
static loading capacity 100 Kg
indicative maximum load Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk40 kg
use Weightlifting - No tight grip, no drop
Find out more
WEIGHT 9 Kg
Length 1205 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating
equipment 2 bearings, 2 bushings
clamping system Seeger
diameter load adapters 50 mm
length load adapters 165 mm
knurling Media
bar surface treatment Hard Chrome
steel bar Standard
static loading capacity 300 kg
use Physical culture
Find out more
WEIGHT 9 Kg (tolerance 3%)
Length 1200 mm
diameter of grip part 28 mm
Load adapters (collars) Rotating and floating
equipment 4 bushings
clamping system Bolt
diameter load adapters 50 mm
length load adapters 165 mm
knurling Media
bar surface treatment Chrome
steel bar Standard
static loading capacity 300 kg
use Physical culture
Find out more
WEIGHT 9 Kg
Length 915 mm
diameter rubberized handles 35 mm
diameter load adapters 50 mm
length load adapters 170 mm
bar surface treatment Chrome
steel bar Standard
use Physical culture
Find out more
WEIGHT 24 Kg
Length 2270 mm
Grip length 1300 mm
diameter of grip part 30 mm
distance between handles 400 mm
Load adapters (collars) Rotating, equipped with bearings
diameter load adapters 50 mm
knurling Media
Marker 810 mm (Powerlifting)
bar surface treatment Hard Chrome, painted black
static loading capacity 300 kg
use Training
Find out more
WEIGHT 31 Kg
Total length 1750 mm
diameter load adapters 50 mm
length load adapters 400 mm
Handle diameter 28 mm
bar surface treatment Painted black
surface treatment adapters Hard Chrome
static loading capacity 600 kg
Find out more
WEIGHT 28.5 Kg
Total length 1590 mm
diameter load adapters 50 mm
length load adapters 330 mm
Handle diameter 28 mm
bar surface treatment Nickel-phosphorus alloy
static loading capacity 400 Kg
Find out more
WEIGHT 20 Kg
Total length 1720 mm
diameter load adapters 50 mm
length load adapters 300 mm
Rubberized handle diameter 35 mm
static loading capacity 600 kg
Find out more
WEIGHT 28 Kg
Total length 1900 mm
diameter load adapters 26 / 50 mm
length load adapters 400 mm
Handle diameter 25 / 38 / 50 mm
bar surface treatment Painted black
surface treatment adapters Hard Chrome
static loading capacity 600 kg
Find out more
WEIGHT 15 Kg
LENGTH 1600 mm
GRIP LENGTH 1025 mm
DIAMETER OF GRIP PART 28 mm
EQUIPMENT 4 Bushings
LOAD ADAPTERS (COLLARS) Rotating
CLAMPING SYSTEM Seeger
DIAMETER LOAD ADAPTERS 50 mm
LENGTH LOAD ADAPTERS 255 mm
ZIGRINKING Deep flattened diamond
CENTRE SECTION BAR Cambered - 200mm
BAR SURFACE TREATMENT Chrome
STEEL BAR Standard
STATIC LOADING CAPACITY 300 kg
USE Seal Row Exercise
Find out more
WEIGHT 2 Kg
Length 1320 mm
Grip length 876 mm
diameter of grip part 35 mm
Load adapters (collars) Fixed
diameter load adapters 28 mm
length load adapters 210 mm
knurling No
Marker No
indicative maximum load 50 Kg
use Super Pump Training
More
WEIGHT 1 Kg
Length 1320 mm
Grip length 880 mm
diameter of grip part 28 mm
Load adapters (collars) Fixed
diameter load adapters 28 mm
length load adapters 210 mm
knurling No
Marker No
indicative maximum load 50 Kg
use Super Pump Training
More

Barbell Weightlifting/Powerlifting

We produce a wide range of barbells that can be divided into three categories: Olympic, hybrid, and specialist.

Olympics

Olympic weightlifting barbells, or weightlifting barbells, built to IWF standards.

Hybrids

These barbells have the main characteristics of Olympic barbells, from which they differ in overall length: 185 and 140 cm precisely. These differences are useful in terms of size and training, as these barbells are high-performance and extremely versatile thanks to their shorter bar length.

Specialists

The category of specialised barbells is numerous in that each barbell is designed in response to specific technical training and usage requirements.

1660 Super Pump Barbell

Bars

1660 Super Pump Barbell

22,11€ FEES and TAXES NOT INCLUDED
Add to cart
1660/1 Super Pump Iron Barbell

Bars

1660/1 Super Pump Iron Barbell

22,11€ FEES and TAXES NOT INCLUDED
Add to cart
8610-8645 EZ Preloaded Barbells - EZ Fixed Rubber Barbell

Weightlifting/Powerlifting barbells

8610-8645 EZ Preloaded Barbells - EZ Fixed Rubber Barbell

44,23€ 175,38€Fascia di prezzo: da 44,23€ a 175,38€ FEES and TAXES NOT INCLUDED
Scegli
Questo prodotto ha più varianti. Le opzioni possono essere scelte nella pagina del prodotto
8710-8745 Fixed Barbells

Weightlifting/Powerlifting barbells

8710-8745 Fixed Barbells

38,13€ 169,28€Fascia di prezzo: da 38,13€ a 169,28€ FEES and TAXES NOT INCLUDED
Scegli
Questo prodotto ha più varianti. Le opzioni possono essere scelte nella pagina del prodotto
9011/1 Safety Squat Barbell

Weightlifting/Powerlifting barbells

9011/1 Safety Squat Barbell

248,58€ FEES and TAXES NOT INCLUDED
Add to cart
9011/2 Seal Row Barbell

Weightlifting/Powerlifting barbells

9011/2 Seal Row Barbell

298,90€ FEES and TAXES NOT INCLUDED
Add to cart
9011/3 Multi Grip Bar

Weightlifting/Powerlifting barbells

9011/3 Multi Grip Bar

189,10€ FEES and TAXES NOT INCLUDED
Add to cart
9012 Olympic Hex Bar

Weightlifting/Powerlifting barbells

9012 Olympic Hex Bar

274,50€ FEES and TAXES NOT INCLUDED
Add to cart
9012/1 Super Hex Bar

Weightlifting/Powerlifting barbells

9012/1 Super Hex Bar

297,38€ FEES and TAXES NOT INCLUDED
Add to cart
NEW
9012/3 LOW HEX BAR

Weightlifting/Powerlifting barbells

9012/3 LOW HEX BAR

199,00€ FEES and TAXES NOT INCLUDED
Add to cart
NEW
9012/4 OPEN HEX BAR

Weightlifting/Powerlifting barbells

9012/4 OPEN HEX BAR

297,38€ FEES and TAXES NOT INCLUDED
Add to cart
9014 Barbell Training 140

Weightlifting/Powerlifting barbells

9014 Barbell Training 140

147,93€ FEES and TAXES NOT INCLUDED
Add to cart
9014/1 Lightweight aluminium barbell

Weightlifting/Powerlifting barbells

9014/1 Lightweight aluminium barbell

178,43€ FEES and TAXES NOT INCLUDED
Add to cart
9015 Olympic Powerlifting Barbell

Weightlifting/Powerlifting barbells

9015 Olympic Powerlifting Barbell

198,25€ FEES and TAXES NOT INCLUDED
Add to cart
9015/1 Lightweight Introductory Barbell

Weightlifting/Powerlifting barbells

9015/1 Lightweight Introductory Barbell

60,24€ FEES and TAXES NOT INCLUDED
Add to cart
9015/2 Competition Powerlift barbell 29 mm

Weightlifting/Powerlifting barbells

9015/2 Competition Powerlift barbell 29 mm

398,03€ FEES and TAXES NOT INCLUDED
Add to cart
9015/3 Training barbell 185

Weightlifting/Powerlifting barbells

9015/3 Training barbell 185

187,58€ FEES and TAXES NOT INCLUDED
Add to cart

To complete your weightlifting/powerlifting area

Accessories for Barbells
Accessories for Barbells

36 Prodotti

Rubberized bumper plates - Bumper plates PU
Rubberized bumper plates - Bumper plates PU

21 Prodotti

Technical Flooring
Technical Flooring

19 Prodotti