PLATES &
BUMPER

Rubber-coated metal discs - Series 9030/3-9035/3 Rubber Plate 

Composed of sizes 1.25; 2.5; 5; 10; 20 kg, exclusively in black, this line was created with the aim of getting the best value for money for multi-purpose discs with handle.

The metal makes it possible to mould the grips while maintaining high structural strength, the rubber provides minimal resilience and good accident prevention and grip comfort. They are the most aesthetically spartan discs in our production and can also be used on technical floors as long as the fall is always accompanied and well controlled.

Polyurethane-coated metal discs - Series 9030-9036 PU Plate

Composed of sizes 1.25; 2.5; 5; 10; 15; 20; 25 kg, two-tone black/grey, this line was created with the aim of achieve the highest quality and aesthetic standards for multi-purpose discs with handle.

Metal makes it possible to mould the grips while maintaining high structural strength, polyurethane provides additional strength, good accident prevention characteristics and a very high level of grip comfort. The discs are harder to the touch than rubberised discs, but the finish achievable with polyurethane allows for very rounded edges. Polyurethane discs are also characterised by their clear colouring, absence of odour, and absence of mould marks, so that flawless aesthetics is one of the most important features of PU Plates. The wear and light degradation of polyurethane is much lower than that of rubber.

Polyurethane Solid Discs - Series 9040/3 - 9046/3 PU Bumper Plate COLOR

Composed of sizes 5; 10; 15; 20; 25 kg, coloured according to the IWF standard, this bumper line is made from metal discs covered with polyurethane. As already mentioned, polyurethane can be considered the best material for producing discs. Extremely high strength, extraordinary compactness, low rebound, no odour, sharp colours, no imperfections and mould marks, perfect coupling with the steel plate, PU discs represent the best possible solution in terms of reliability, aesthetics and overall quality. The wear and light degradation of polyurethane is significantly lower than that of rubber. In addition, due to the high density of the material, PU discs have a very low thickness, which allows a barbell to be loaded over 350 kg, almost as if it were a metal disc, but with the advantage of being more resilient. However, the lower elastic deformation compared to rubber can also be considered a limitation for those who prefer softer, more bouncy bumpers.

Polyurethane Solid Discs - Series 9040/4 - 9046/4 PU Bumper Plate BLACK

For aesthetic reasons, the PU Bumper Plates, made from polyurethane-coated metal discs, are also available in single-colour black with white logos and numbers

Solid Rubber Discs - Series 9040/1-9044/1 Rubber Bumper Plate

Solid bumper plates are made for weightlifting, powerlifting, cross training and therefore to resist the barbell falling to the ground, hence the name bumper = bumper. To ensure evenly distributed support, as well as a fixed height of the bar from the floor, the bumper plates are all produced with the same outer diameter, conventionally set at 45 cm by the various federal regulations. Due to its mechanical characteristics, synthetic rubber is the most suitable material for making this type of plate.

The 9040/1-9044/1 series, consisting of sizes 5; 10; 15; 20 kg, was created with the aim of getting the best value for moneyThis is why it is only produced in black, unpainted and with a steel ring.

Rubber Solid Discs - Series 9040/2-9046/2 Pro-Training Rubber Bumper Plate

Composed of the sizes 5; 10; 15; 20; 25 kg, coloured according to the IWF standard, this bumper line was created with the aim of achieve high quality standards. The rubber used is the same as that of the /1 line but the disc, coloured, has a steel plate to reinforce the central area and reduce the tolerance with the rocker arm. For these reasons, reliability, durability and insertion precision on the rocker arm are improved.

Solid Rubber Competition Bumper Plates - Series 9042/5 - 9046/5 Competition Rubber Bumper Plate

Composed of the sizes 10; 15; 20; 25 kg, colours according to the IWF standard (5 kg bumper discs are not used in weightlifting competitions, but smaller fractional rubberised discs: Code 9038/50). This bumper line was created with the aim of achieving the highest quality standards for competition discs. The rubber used is the same as in the Pro-Training line, but the disc is fitted with a large 185 mm diameter steel plate to reinforce the central area, reduce the tolerance with the barbell and also, most importantly, reduce the amount of rubber in the disc. Central compactness, precision insertion on the rocker arm, reduced thickness and low rebound effect characterise the Competition Bumper Plate.

Technical Discs - Series 9038/05 - 9038/25 FRACTIONAL PLATES FRICTION GRIP - MY2021

Composed of the sizes 0.5; 1; 1.5; 2; 2.5 kg, coloured according to the IWF standard, they are small metal discs covered with rubber, so that the weight to be lifted can be divided. The bore does not have a ring but features a rubber membrane that can exert a frictional grip on the barbell. Thanks to this solution, the fractional discs can be positioned outside the disc clamp collars so that they can be inserted and removed more quickly. In fact, the rubber membrane allows loading but, by adhering to the disc holder, does not allow the disc to move or slip out easily due to gravity; FRICTION GRIP function.

Technical Plates - 9040/25 Technical Plates 2,5 kg

Solid PVC disc, without ring, manufactured with a thickness of only 2 cm in order to achieve the same diameter as the bumper discs, 45 cm, and thus bring the barbell to the same height from the ground. This allows Technical Plates 2.5 to be used in combination with the bumper discs, as the space they take up on the barbell is very small. The material, which is hard and resistant, also allows these discs to be used on technical floors as long as the fall is always accompanied and controlled.

Technical Hollow Plates - Series 9040/25H - 9040/50H

Composed of the 2.5 and 5 kg sizes, they are hollow polyethylene discs, without rings, produced with a high thickness, 6 and 8.5 cm, so as to achieve the same diameter as the bumper discs, 45 cm, bring the barbell to the same height from the ground, while maintaining the possibility, despite the very low weight, of dropping the barbell on rubberized floors.

Technical Discs -9036/6-9046/6 Powerlifting Calibrated Steel Plates

Single-sided steel discs make up a special line dedicated to Powerlifting and characterised by precise technical and qualitative choices of a superior level.