What sort of wall is required to install this anchor safely?

Secure fixing requires a reinforced concrete or solid brick wall with a minimum thickness of 15 cm. This fixing is NOT suitable for plasterboard, aerated concrete or lightweight partition walls: a genuine load-bearing structure is required. Sidea always recommends having the installation assessed by a professional technician or qualified builder who can check the type of wall, its thickness and the specific structural conditions of your premises.

Are the wall-fixing screws included?

Yes, the 9063 anchor comes with a full set of fixing screws. However, expansion plugs are NOT supplied by Sidea, as the choice of the correct plug depends on the specific type of wall (reinforced concrete, brick, hollow blocks, etc.). A general guideline for reinforced concrete: M8 anchors with a depth of 60–80 mm, tightening torque 15–20 Nm. For professional installations in CrossFit boxes or functional training studios, we recommend certified chemical anchors.

Can I use this anchor to hang punching bags from the ceiling?

Yes, the 9063 anchor can be installed on the ceiling for boxing bags weighing up to 80–100 kg, provided that the ceiling is made of reinforced concrete of sufficient thickness (minimum 12–15 cm). For ceiling installation, it is ESSENTIAL to consult a structural engineer: the dynamic weight of a swinging bag generates forces far greater than its static weight. If you have any doubts about the strength of the ceiling, install the bag on the wall or use a free-standing frame.

How many anchor points are needed for a complete flying rig?

For a standard flying or suspension training setup, you need two 9063 anchor points, installed 80–120 cm apart at a height of 240–280 cm from the floor. This configuration allows for the safe performance of all basic exercises: atomic push-ups, inverted rows, assisted pistol squats, pikes and hamstring curls. For more advanced exercises involving asymmetric loading (one-arm row, archer push-up), some trainers prefer to increase the distance to 150 cm.

What is the difference between this anchor and a simple eye hook?

The 9063 anchor features a double half-ring structure welded onto a rigid plate, whilst a single-eye hook distributes the entire load across a single point. The dual-ring design of the 9063 reduces stress on individual weld points and allows both flying slings and climbing carabiners (8–10 mm in diameter) to be attached without causing dangerous twisting. Furthermore, the 3 mm-thick plate ensures a larger contact surface with the wall compared to direct-screw hooks.

Can I fit this anchor myself, or do I need a professional?

Sidea ALWAYS recommends that installation be carried out by a qualified technician or professional builder. An incorrectly installed anchor may fail during training, posing a risk of serious injury. The professional must: check the type of wall using diagnostic tools, select the correct certified wall plugs, drill holes to the exact depth (avoiding pipes and electrical cables), and tighten the bolts to the specified torque. In commercial settings (gyms, training studios), certified installation is often required by insurance companies.

Is the stainless steel anchor also suitable for outdoor installations?

Yes, the AISI 304 stainless steel used in the 9063 anchor is resistant to atmospheric corrosion and can be installed outdoors. It is the ideal choice for outdoor functional training facilities, equipped terraces and open-air gyms. In marine environments or areas with high salinity, we recommend checking the condition of bolts and welds periodically (every 6 months). For outdoor installations, the choice of anchors becomes even more critical: opt for chemical anchors certified for outdoor use with a minimum strength class of C20/25.

What instalment payment options are available?

Sidea offers a range of instalment payment options to make it easier to purchase professional equipment. Please see the dedicated page: Sidea Payment Options.

I’m a fitness professional – can I get special rates?

If you work in the fitness or sports sector, register on the website as a Professional or as an ASD to gain access to the price list reserved for industry professionals. Pro registration allows you to view exclusive discounts and special terms across the entire Sidea catalogue.

Is Sidea listed on the MEPA for public sector procurement?

Yes, Sidea is an authorised supplier on the MEPA (Public Administration Electronic Marketplace). Public bodies, schools, universities, local authorities and public sports facilities can purchase Sidea equipment via the Acquisti in Rete PA platform. For information on product codes and direct MEPA orders, please contact Sidea customer service.

What are Sidea’s returns and warranty terms?

Sidea guarantees the right to cancel within 14 days of delivery for all online purchases, in accordance with current legislation. Products must be returned undamaged and in their original packaging. For full details on returns, refunds and the warranty, please see the Terms and Conditions of Sale page.

Why choose Sidea equipment?

Sidea has been designing and distributing professional fitness equipment since 1999: over 25 years’ experience serving gyms, sports coaches, CrossFit boxes, personal training studios and enthusiasts of advanced home fitness. Official distributor for StrongFirst and Luxiaojun, exhibiting at the FIBO international trade fair and technical sponsor of the Summit of Strength. Every product is developed with a focus on durability, functionality and suitability for real-world use. The Gym Design service offers bespoke design with 3D renderings. A warehouse covering over 4,000 m² in Gambettola (FC) ensures rapid order fulfilment, direct technical advice and a special price list for professionals and amateur sports clubs (ASD).

Filter by Category

9063 Stainless Steel Wall Anchor

45,75€ FEES and TAXES NOT INCLUDED

Stainless steel anchor. It can be used to attach punching bags to the ceiling, as well as gym ropes, flying equipment and other suspension training accessories (taking care to check that the ceiling can support the weight).

Maximum load: 150 Kg

WALL-MOUNTING FIXINGS INCLUDED

View more product details >>

View data sheet >>

Disponibile

9063 Stainless Steel Wall Anchor

1698 Object fastening strap

1 × 1698 Object fastening strap

Disponibile

5,34€ FEES and TAXES NOT INCLUDED

1710 Gym Rope

1 × 1710 Gym Rope

Disponibile

283,65€ FEES and TAXES NOT INCLUDED

1711 Easy Gym Rope

1 × 1711 Easy Gym Rope

Disponibile

192,15€ FEES and TAXES NOT INCLUDED

New installations - Gym Design projects

Statutory guarantee of conformity: 2 years for consumers. See the official notice - Read the page - europa.eu/youreurope/guarantees

Spare parts and repairs: Spare parts for this product are available in the section Spare parts, with up-to-date availability and prices. Maintenance instructions can be found in the manual supplied with the product. There are no restrictions on repairs.

SKU: 9063 Categorie: Combat-Fitness boxing, Flying & Suspension training, Catalogue Products, Rack tool Tags: Fitness Boxing, Flying, storage rack

Stainless Steel Wall Anchor

Maximum load: 150 Kg

Wall anchoring: For anchoring it is always necessary to rely on a professional technician to assess the type of wall, the thickness of the wall and its specific condition. A general guideline for a reinforced concrete wall is to use 4 Ø 15 mm wall plugs with M10 screws. These fixings are supplied by Sidea.

Weight	1 kg

Secure fixing requires a reinforced concrete or solid brick wall with a minimum thickness of 15 cm. This fixing is NOT suitable for plasterboard, aerated concrete or lightweight partition walls: a genuine load-bearing structure is required. Sidea always recommends having the installation assessed by a professional technician or qualified builder who can check the type of wall, its thickness and the specific structural conditions of your premises.
Yes, the 9063 anchor comes with a full set of fixing screws. However, expansion plugs are NOT supplied by Sidea, as the choice of the correct plug depends on the specific type of wall (reinforced concrete, brick, hollow blocks, etc.). A general guideline for reinforced concrete: M8 anchors with a depth of 60–80 mm, tightening torque 15–20 Nm. For professional installations in CrossFit boxes or functional training studios, we recommend certified chemical anchors.
Yes, the 9063 anchor can be installed on the ceiling for boxing bags weighing up to 80–100 kg, provided that the ceiling is made of reinforced concrete of sufficient thickness (minimum 12–15 cm). For ceiling installation, it is ESSENTIAL to consult a structural engineer: the dynamic weight of a swinging bag generates forces far greater than its static weight. If you have any doubts about the strength of the ceiling, install the bag on the wall or use a free-standing frame.
For a standard flying or suspension training setup, you need two 9063 anchor points, installed 80–120 cm apart at a height of 240–280 cm from the floor. This configuration allows for the safe performance of all basic exercises: atomic push-ups, inverted rows, assisted pistol squats, pikes and hamstring curls. For more advanced exercises involving asymmetric loading (one-arm row, archer push-up), some trainers prefer to increase the distance to 150 cm.
The 9063 anchor features a double half-ring structure welded onto a rigid plate, whilst a single-eye hook distributes the entire load across a single point. The dual-ring design of the 9063 reduces stress on individual weld points and allows both flying slings and climbing carabiners (8–10 mm in diameter) to be attached without causing dangerous twisting. Furthermore, the 3 mm-thick plate ensures a larger contact surface with the wall compared to direct-screw hooks.
Sidea ALWAYS recommends that installation be carried out by a qualified technician or professional builder. An incorrectly installed anchor may fail during training, posing a risk of serious injury. The professional must: check the type of wall using diagnostic tools, select the correct certified wall plugs, drill holes to the exact depth (avoiding pipes and electrical cables), and tighten the bolts to the specified torque. In commercial settings (gyms, training studios), certified installation is often required by insurance companies.
Yes, the AISI 304 stainless steel used in the 9063 anchor is resistant to atmospheric corrosion and can be installed outdoors. It is the ideal choice for outdoor functional training facilities, equipped terraces and open-air gyms. In marine environments or areas with high salinity, we recommend checking the condition of bolts and welds periodically (every 6 months). For outdoor installations, the choice of anchors becomes even more critical: opt for chemical anchors certified for outdoor use with a minimum strength class of C20/25.
Sidea offers a range of instalment payment options to make it easier to purchase professional equipment. Please see the dedicated page: Sidea Payment Options.
If you work in the fitness or sports sector, register on the website as a Professional or as an ASD to gain access to the price list reserved for industry professionals. Pro registration allows you to view exclusive discounts and special terms across the entire Sidea catalogue.
Yes, Sidea is an authorised supplier on the MEPA (Public Administration Electronic Marketplace). Public bodies, schools, universities, local authorities and public sports facilities can purchase Sidea equipment via the Acquisti in Rete PA platform. For information on product codes and direct MEPA orders, please contact Sidea customer service.
Sidea guarantees the right to cancel within 14 days of delivery for all online purchases, in accordance with current legislation. Products must be returned undamaged and in their original packaging. For full details on returns, refunds and the warranty, please see the Terms and Conditions of Sale page.
Sidea has been designing and distributing professional fitness equipment since 1999: over 25 years’ experience serving gyms, sports coaches, CrossFit boxes, personal training studios and enthusiasts of advanced home fitness. Official distributor for StrongFirst and Luxiaojun, exhibiting at the FIBO international trade fair and technical sponsor of the Summit of Strength. Every product is developed with a focus on durability, functionality and suitability for real-world use. The Gym Design service offers bespoke design with 3D renderings. A warehouse covering over 4,000 m² in Gambettola (FC) ensures rapid order fulfilment, direct technical advice and a special price list for professionals and amateur sports clubs (ASD).