PRE-LOADED PROFESSIONAL BARBELL

Pre-loaded barbells, made for intensive professional use, with chrome-plated steel bar and rubberised weights, match the PU dumbbells series 8804 - 50 and the pre-loaded EZ barbells 8610 - 45. The series is wide, ranging from 10 to 45 kg with weight intervals of 2.5 kg, allowing high user-friendliness, especially in step sets, supersets, etc. The weight indicated on the side refers to the entire barbell and is fixed, not modifiable by adding or removing weight.

The barbell have a deep knurl, the bar is straight and the weights do not rotate. There are therefore no facilitating solutions as is the case with the EZ bar, or in rotating barbells that reduce the inertia given to the rotation of the plates. Training with this type of preloaded barbells is therefore complete and high-impact.

Barbells can be stored in the Horizontal Barbell Rack Code 9049

Bar dimensions: Ø 30 mm x 960 mm (bar only)
Total balance dimensions: 1070 - 1170 mm (including weights)

Available weights:

BARBELL SELECTION GUIDE

The SIDEA range includes a wide variety of barbells, divided into three main categories: Olympic, Hybrid and Specialised.
The choice of model depends on the type of training, the exercises performed, the weights used and the technical specifications required.

MAIN CATEGORIES

OLYMPIC BARBELLS

Barbells designed for Olympic weightlifting and manufactured in accordance with IWF dimensional standards.

PREMIUM

The top-of-the-range models are the two PREMIUM barbells, featuring a black-chrome-plated bar:

• 9015/4 Premium Men’s Olympic Barbell
• 9015/5 Premium Women’s Olympic Barbell

They are made from high-tensile-strength steel and feature specific design features to withstand tearing, momentum and repeated falls onto the platform. The medium-depth knurling ensures an effective grip, whilst maintaining a good level of comfort even during frequent, high-volume training sessions.

This category also includes the following model, given its size, performance and premium-level build quality:

• 9015/9 Olympic Barbell for CrossFit®, also available in a women’s version 9015/9W,

It is designed for high-rep workouts and to withstand high levels of impact stress, typical of cross-training sessions in which the barbell is subjected to frequent and repeated drops.

The bar is made of steel, finished with a hard chrome plating, and has high tensile strength; it has been selected to ensure the right balance between strength, elasticity and the ability to return to its original shape following dynamic stresses. In addition, specific high-value technical solutions have been incorporated, developed to improve the fatigue resistance of the sleeves, the stability of the internal components and long-term reliability.

The construction, mechanical connections and components are therefore designed to meet the demands of cross-training, where the volume of work, speed of execution, frequent changes in load and repeated drops onto the platform require superior characteristics to those of a traditional Olympic barbell.

TRAINING

 TRAINING models:

• 9015/4C H-Performance
• 9015/8 Olympic Training Barbell

Both are designed to offer the right balance between performance, build quality and cost. The 9015/4C uses a higher-performance steel than the 9015/8 and features the same internal configuration in the sleeves as the Premium models. The 9015/8 is therefore intended for workouts that do not require particularly high tensile forces. For this reason, its technical data sheet specifies the recommended maximum loads according to the exercise being performed.

HYBRID BARBELLS

These models retain the main features of Olympic barbells, differing in their overall length, which is 185 and 140 cm respectively.

HYBRIDS

This category includes:

• 9015/3 Training barbell 185
• 9014 Barbell Training 140

These models retain the main features of Olympic barbells, differing in their overall length, which is 185 and 140 cm respectively.

The shorter bar reduces the overall dimensions and makes the barbells particularly easy to handle and versatile. They are ideal for gyms with limited space, home gyms, group classes and training programmes where the full length of a regulation Olympic barbell is not required.

SPECIALISED BALANCERS

Specialist barbells are designed to meet specific technical, biomechanical or training-methodological requirements.

POWERLIFTING

• 9015 Olympic Powerlifting Barbell
  A model developed at the Sidea gym, featuring a bar with a diameter of 32 mm, which is larger than the 29 mm bars commonly used in powerlifting.
• 9015/2 Competition Powerlift Bar 29 mm
  A barbell designed in accordance with IPF technical regulations and characterised by high-quality construction, rigidity and dimensional accuracy.

ATHLETIC AND TECHNICAL TRAINING

• 9015/7 Axle 50 Barbell
  Barbell with handles, i.e. a bar, 51 mm in diameter, suitable for improving grip strength, athletic training and strongman exercises.
• 9014/1 Lightweight Aluminium Barbell
• 9015/1 Lightweight Introductory Barbell

Two lightweight barbells designed for learning weightlifting techniques, with a particular focus on the snatch and clean and jerk. The 9014/1 is a technical aluminium barbell, the same size as a women’s Olympic barbell but weighing just 5 kg, whilst the 9015/1, weighing 3.5 kg, is an economical and compact option (168 cm), also suitable for group lessons and training sessions.

ANGLED barbell

• 9027 EZ Angled Barbell
• 9027P EZ Premium Angled Barbell

Contoured barbells for bicep and tricep training, with grips designed to reduce stress on the wrists and elbows. The first is a basic, functional model; the second features superior-quality padding and finishes. See the comparison.

SAFETY SQUAT BAR

• 9011/1 Safety Squat Barbell

A barbell fitted with padding and front handles, useful for those with limited mobility in the shoulders, wrists or elbows, which makes it difficult to use a traditional barbell for squats.

The high level of load control also enhances its versatility, making it suitable for lunges, Bulgarian squats, single-leg exercises, step-ups and other lower-body variations.

PRE-LOADED BARBELLS

• 8710–8745 Pre-loaded Rocker Arms
• 8610–8645 EZ Pre-loaded Barbells

Two complete sets ranging from 10 to 45 kg, each comprising ten barbells. They are a gym training classic thanks to their exceptional ease of use.

They are particularly well suited to stripping, drop sets, supersets and training techniques that involve rapid changes in load and short rest periods.

TRICEPS BAR

• 9027/1 Triceps Bar

A specialised barbell fitted with parallel handles, designed for triceps training and to offer alternative grips compared to traditional barbells.

HEX BAR

The range includes various versions of the hex bar, designed to meet specific training requirements:

• 9012 Olympic Hex Bar
  Traditional hex bar with 40 cm long weight plate sleeves, also suitable for weight plates with a wide flange.
• 9012/1 Super Hex Bar
  This model features raised sleeves to make it easier to load and unload discs, as well as a multi-diameter rotating handle.
• 9012/2 Olympic Hex Bar Compact
  A compact version of the traditional hex bar, with 32 cm long weight plate sleeves.
• 9012/3 Low Hex Bar
  A hex bar designed for athletic training and to offer a high degree of freedom of movement across different planes of motion. Its unique configuration allows for greater depth of movement during lunges, squats and single-leg exercises, promoting wide, natural movements. The horizontal positioning of the discs simplifies loading and unloading and allows the bar to sit lower than traditional hex bars, thereby increasing the available range of motion. With the addition of the Hamstring Bar 9012/3B, the Low Hex Bar 9012/3 is transformed into a particularly versatile lower-body training station, suitable for sport-specific athletic training, strength work and motor control, and for settings where compactness and versatility are key advantages, such as home gyms and personal training studios.
• 9012/4 Open Hex Bar
  An innovative evolution of the hex bar, designed to offer greater versatility, compactness and ease of use across a wide range of exercises. Thanks to its compact design, ease of use and adaptability, it is undoubtedly the most functional of all the quadra bars.

FARMER WALK BARS

• 9026 Farmer Walk Bars

Originally designed for the farmer’s walk, these bars are also suitable for a wide range of carrying, lifting and grip-strengthening exercises.

The main bar, which can be gripped directly for specific grip training exercises, has a diameter of 50 mm, whilst the two dedicated handles have a diameter of 28 mm, closer to that of a standard barbell. Their compact size and high versatility make Farmer Walk Bars particularly suitable for athletic preparation, functional training and, more generally, strength and conditioning programmes.

SEAL ROW

• 9011/2 Seal Row Barbell

A barbell designed specifically for use on the 9021 Seal Row Bench. The bar’s unique geometry facilitates correct positioning relative to the bench and allows for a more practical, deeper and more effective performance of horizontal pull exercises, such as the seal row, barbell row and barbell row.

PUMP TRAINING

• 1660 Super Pump Barbell – length 132 cm, grip Ø 35 mm, weight 2 kg
• 1660/1 Super Pump Iron Barbell  - length 132 cm, handle Ø 28 mm, weight 1.5 kg

Compact barbells designed for Pump Training, a group activity based on light weights, high repetitions and continuous exercise set to music. Ideal for developing endurance strength, muscle tone and metabolic conditioning through multi-joint sequences led by an instructor.

OLYMPIC BARBELLS

Barbells designed for Olympic weightlifting and manufactured in accordance with IWF dimensional standards.

The top-of-the-range models are the two PREMIUM barbells, featuring a black-chrome-plated bar:

• 9015/4 Premium Men’s Olympic Barbell
• 9015/5 Premium Women’s Olympic Barbell

They are made from high-tensile-strength steel and feature specific design features to withstand tearing, momentum and repeated falls onto the platform. The medium-depth knurling ensures an effective grip, whilst maintaining a good level of comfort even during frequent, high-volume training sessions.

This category also includes the following model, given its size, performance and premium-level build quality:

• 9015/9 Olympic Barbell for CrossFit®, also available in a women’s version 9015/9W,

It is designed for high-rep workouts and to withstand high levels of impact stress, typical of cross-training sessions in which the barbell is subjected to frequent and repeated drops.

The bar is made of steel, finished with a hard chrome plating, and has high tensile strength; it has been selected to ensure the right balance between strength, elasticity and the ability to return to its original shape following dynamic stresses. In addition, specific high-value technical solutions have been incorporated, developed to improve the fatigue resistance of the sleeves, the stability of the internal components and long-term reliability.

The construction, mechanical connections and components are therefore designed to meet the demands of cross-training, where the volume of work, speed of execution, frequent changes in load and repeated drops onto the platform require superior characteristics to those of a traditional Olympic barbell.

The TRAINING models complete the range:

• 9015/4C H-Performance
• 9015/8 Olympic Training Barbell

Both are designed to offer the right balance between performance, build quality and cost. The 9015/4C uses a higher-performance steel than the 9015/8 and features the same internal configuration in the sleeves as the Premium models. The 9015/8 is therefore intended for workouts that do not require particularly high tensile forces. For this reason, its technical data sheet specifies the recommended maximum loads according to the exercise being performed.

 

HYBRID BARBELLS

This category includes:

• 9015/3 Training barbell 185
• 9014 Barbell Training 140

These models retain the main features of Olympic barbells, differing in their overall length, which is 185 and 140 cm respectively.

The shorter bar reduces the overall dimensions and makes the barbells particularly easy to handle and versatile. They are ideal for gyms with limited space, home gyms, group classes and training programmes where the full length of a regulation Olympic barbell is not required.

 

SPECIALISED BALANCERS

Specialist barbells are designed to meet specific technical, biomechanical or training-methodological requirements.

Powerlifting

• 9015 Olympic Powerlifting Barbell
  A model developed at the Sidea gym, featuring a bar with a diameter of 32 mm, which is larger than the 29 mm bars commonly used in powerlifting.
• 9015/2 Competition Powerlift Bar 29 mm
  A barbell designed in accordance with IPF technical regulations and characterised by high-quality construction, rigidity and dimensional accuracy.

 

Physical and technical training

• 9015/7 Axle 50 Barbell
  Barbell with handles, i.e. a bar, 51 mm in diameter, suitable for improving grip strength, athletic training and strongman exercises.
• 9014/1 Lightweight Aluminium Barbell
• 9015/1 Lightweight Introductory Barbell

Two lightweight barbells designed for learning weightlifting techniques, with a particular focus on the snatch and clean and jerk. The 9014/1 is a technical aluminium barbell, the same size as a women’s Olympic barbell but weighing just 5 kg, whilst the 9015/1, weighing 3.5 kg, is an economical and compact option (168 cm), also suitable for group lessons and training sessions.

 

Angled barbells

• 9027 EZ Angled Barbell
• 9027P EZ Premium Angled Barbell

Contoured barbells for bicep and tricep training, with grips designed to reduce stress on the wrists and elbows. The first is a basic, functional model; the second features superior-quality padding and finishes. See the comparison.

 

Safety Squat Bar

• 9011/1 Safety Squat Barbell

A barbell fitted with padding and front handles, useful for those with limited mobility in the shoulders, wrists or elbows, which makes it difficult to use a traditional barbell for squats.

The high level of load control also enhances its versatility, making it suitable for lunges, Bulgarian squats, single-leg exercises, step-ups and other lower-body variations.

 

Pre-loaded barbells

• 8710–8745 Pre-loaded Rocker Arms
• 8610–8645 EZ Pre-loaded Barbells

Two complete sets ranging from 10 to 45 kg, each comprising ten barbells. They are a gym training classic thanks to their exceptional ease of use.

They are particularly well suited to stripping, drop sets, supersets and training techniques that involve rapid changes in load and short rest periods.

 

Triceps Bar

• 9027/1 Triceps Bar

A specialised barbell fitted with parallel handles, designed for triceps training and to offer alternative grips compared to traditional barbells.

 

Hex Bar

The range includes various versions of the hex bar, designed to meet specific training requirements:

• 9012 Olympic Hex Bar
  Traditional hex bar with 40 cm long weight plate sleeves, also suitable for weight plates with a wide flange.
• 9012/1 Super Hex Bar
  This model features raised sleeves to make it easier to load and unload discs, as well as a multi-diameter rotating handle.
• 9012/2 Olympic Hex Bar Compact
  A compact version of the traditional hex bar, with 32 cm long weight plate sleeves.
• 9012/3 Low Hex Bar
  A hex bar designed for athletic training and to offer a high degree of freedom of movement across different planes of motion. Its unique configuration allows for greater depth of movement during lunges, squats and single-leg exercises, promoting wide, natural movements. The horizontal positioning of the discs simplifies loading and unloading and allows the bar to sit lower than traditional hex bars, thereby increasing the available range of motion. With the addition of the Hamstring Bar 9012/3B, the Low Hex Bar 9012/3 is transformed into a particularly versatile lower-body training station, suitable for sport-specific athletic training, strength work and motor control, and for settings where compactness and versatility are key advantages, such as home gyms and personal training studios.
• 9012/4 Open Hex Bar
  An innovative evolution of the hex bar, designed to offer greater versatility, compactness and ease of use across a wide range of exercises. Thanks to its compact design, ease of use and adaptability, it is undoubtedly the most functional of all the quadra bars.

 

Farmer Walk Bars

• 9026 Farmer Walk Bars

Originally designed for the farmer’s walk, these bars are also suitable for a wide range of carrying, lifting and grip-strengthening exercises.

The main bar, which can be gripped directly for specific grip training exercises, has a diameter of 50 mm, whilst the two dedicated handles have a diameter of 28 mm, closer to that of a standard barbell. Their compact size and high versatility make Farmer Walk Bars particularly suitable for athletic preparation, functional training and, more generally, strength and conditioning programmes.

 

Seal Row

• 9011/2 Seal Row Barbell

A barbell designed specifically for use on the 9021 Seal Row Bench. The bar’s unique geometry facilitates correct positioning relative to the bench and allows for a more practical, deeper and more effective performance of horizontal pull exercises, such as the seal row, barbell row and barbell row.

 

Pump training

• 1660 Super Pump Barbell – length 132 cm, grip Ø 35 mm, weight 2 kg
• 1660/1 Super Pump Iron Barbell  - length 132 cm, handle Ø 28 mm, weight 1.5 kg

Compact barbells designed for Pump Training, a group activity based on light weights, high repetitions and continuous exercise set to music. Ideal for developing endurance strength, muscle tone and metabolic conditioning through multi-joint sequences led by an instructor.

WEIGHTLIFTING/POWERLIFTING BARBELLS

PREMIUM MALE OLYMPIC BARBELL- Code 9015/4

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting

Find out more

PREMIUM FEMALE OLYMPIC BARBELL- Code 9015/5

WEIGHT	15 Kg
Length	2010 mm
Grip length	1310 mm
diameter of grip part	25 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	320 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome Black
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	580 Kg
use	Weightlifting

Find out more

OLYMPIC TRAINING BARBELLS H-PERFORMANCE - Code 9015/4c

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	8 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	415 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 200,000
static loading capacity	700 Kg
use	Weightlifting / Multi-purpose

Find out more

OLYMPIC TRAINING BARBELL - Code 9015/8

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 185 - Code 9015/3

WEIGHT	14 Kg
Length	1850 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	250 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

TRAINING BARBELL 140 - Code 9014

WEIGHT	10 Kg
Length	1400 mm
Grip length	1003 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Flattened diamond medium
centre section bar	Without knurling
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome
steel bar	Special
Bar tensile strength	Tensile Strength PSI 132,000
static loading capacity	300 kg
indicative maximum load	Deadlift: 180 Kg Squat150 kg Snatch/Clean & Jerk: 100 Kg
use	Multi-purpose

Find out more

OLYMPIC BARBELL FOR CROSSFIT® - Code 9015/9

WEIGHT	20 Kg
Length	2200 mm
Grip length	1310 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	4 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Volcano Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 242,350
static loading capacity	1000 Kg
use	Cross training / Weightlifting

More

OLYMPIC POWERLIFTING BARBELL - Code 9015

WEIGHT	20 Kg
Length	2208 mm
Grip length	1329 mm
diameter of grip part	32 mm
Load adapters (collars)	Rotating
equipment	2 needle roller bearings, 4 ball bearings, 2 bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	410 mm
knurling	Media
centre section bar	With knurling 20 cm
Marker	810 mm (Powerlifting) and 910 mm (Weightlifting)
bar surface treatment	Hard Chrome
steel bar	Special, reclaimed bond
Bar tensile strength	Tensile Strength PSI 70,000
static loading capacity	650 Kg
indicative maximum load	Deadlift: 300 Kg Squat250 Kg Snatch/Clean & Jerk200 kg
use	Powerlifting

Find out more

COMPETITION POWERLIFT BAR 29 mm - Code 9015/2

WEIGHT	20 Kg
LENGTH	2200 mm
GRIP LENGTH	1310 mm
DIAMETER OF GRIP PART	29 mm
LOAD ADAPTERS (COLLARS)	Rotating (disc stop collars 12 mm)
EQUIPMENT	4 bushings
CLAMPING SYSTEM	4 seeger
DIAMETER LOAD ADAPTERS	50 mm
LENGTH LOAD ADAPTERS	433 mm
ZIGRINKING	Deep volcano, crossed 30°
CENTRE SECTION BAR	knurling
MARKER	810 mm
BAR SURFACE TREATMENT	Hard Chrome
STEEL BAR	Special, reclaimed bond
BAR TENSILE STRENGTH	Tensile Strength PSI 242,350
STATIC LOADING CAPACITY	2000 Kg
USE	Powerlifting

Find out more

AXLE 50 BARBELL- Code 9015/7

WEIGHT	20 Kg
Length	2120 mm
Grip length	1310 mm
diameter of grip part	50 mm
Load adapters (collars)	Non-rotating
diameter load adapters	50 mm
length load adapters	390 mm
knurling	No
Marker	No
bar surface treatment	Micaceous paint
steel bar	Standard
static loading capacity	300 kg
use	Athletic training, Powerlifting

Find out more

LIGHT ALUMINUM BARBELL - Code 9014/1

WEIGHT	5 Kg
Length	2010 mm
Grip length	1310 mm
diameter of grip part	25 mm
Load adapters (collars)	Rotating
equipment	4 nylon bushings
clamping system	4 seeger
diameter load adapters	50 mm
length load adapters	320 mm
knurling	Media
centre section bar	Without knurling
Marker	810 mm (Powerlifting) and 910 (Weightlifting)
bar	Aluminium
static loading capacity	100 Kg
indicative maximum load	75 kg

Find out more

INTRODUCTIVE LIGHT BARBELL - Code 9015/1

WEIGHT	3.5 Kg
Length	1680 mm
Grip length	1280 mm
diameter of grip part	28 mm
Load adapters (collars)	Fixed
diameter load adapters	50 mm
length load adapters	195 mm
knurling	No
Marker	910 mm (Weightlifting)
bar	Steel
static loading capacity	100 Kg
indicative maximum load	Deadlift: 50 Kg Squat: 30 Kg Snatch/Clean & Jerk40 kg
use	Weightlifting - No tight grip, no drop

Find out more

ANGLE-EZ PREMIUM BARBELL- Code 9027P

WEIGHT	9 Kg
Length	1205 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating
equipment	2 bearings, 2 bushings
clamping system	Seeger
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Hard Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

ANGULAR BARBELL -EZ - Code 9027

WEIGHT	9 Kg (tolerance 3%)
Length	1200 mm
diameter of grip part	28 mm
Load adapters (collars)	Rotating and floating
equipment	4 bushings
clamping system	Bolt
diameter load adapters	50 mm
length load adapters	165 mm
knurling	Media
bar surface treatment	Chrome
steel bar	Standard
static loading capacity	300 kg
use	Physical culture

Find out more

TRICEPS BAR - Code 9027/1

WEIGHT	9 Kg
Length	915 mm
diameter rubberized handles	35 mm
diameter load adapters	50 mm
length load adapters	170 mm
bar surface treatment	Chrome
steel bar	Standard
use	Physical culture

Find out more

SAFETY SQUAT BARBELL - Code 9011/1

WEIGHT	24 Kg
Length	2270 mm
Grip length	1300 mm
diameter of grip part	30 mm
distance between handles	400 mm
Load adapters (collars)	Rotating, equipped with bearings
diameter load adapters	50 mm
knurling	Media
Marker	810 mm (Powerlifting)
bar surface treatment	Hard Chrome, painted black
static loading capacity	300 kg
use	Training

Find out more

OLYMPIC HEX BAR - Code 9012

WEIGHT	31 Kg
Total length	1750 mm
diameter load adapters	50 mm
length load adapters	400 mm
Handle diameter	28 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

SUPER HEX BAR - Code 9012/1

WEIGHT	28 Kg
Total length	1900 mm
diameter load adapters	26 / 50 mm
length load adapters	400 mm
Handle diameter	25 / 38 / 50 mm
bar surface treatment	Painted black
surface treatment adapters	Hard Chrome
static loading capacity	600 kg

Find out more

OLYMPIC HEX BAR COMPACT - Code 9012/2

WEIGHT	28.5 Kg
Total length	1590 mm
diameter load adapters	50 mm
length load adapters	330 mm
Handle diameter	28 mm
bar surface treatment	Nickel-phosphorus alloy
static loading capacity	400 Kg

Find out more

LOW HEX BAR - Code 9012/3

WEIGHT	20 Kg
Total length	1720 mm
diameter load adapters	50 mm
length load adapters	300 mm
Rubberized handle diameter	35 mm
static loading capacity	600 kg

Find out more

OPEN HEX BAR - Code 9012/4

WEIGHT	21.9 kg
Total length	1862 mm
diameter load adapters	50 mm
length load adapters	400 mm
Rubberized handle diameter	29 mm
static loading capacity	600 kg

Find out more

SEAL ROW BARBELL - Cod 9011/2

WEIGHT	15 Kg
Total length	1600 mm
diameter load adapters	50 mm
length load adapters	255 mm
Handle diameter	28 mm
static loading capacity	300 kg

Find out more

SUPER PUMP BARBELL- Code 1660

WEIGHT	2 Kg
Total length	1320 mm
diameter load adapters	28 mm
length load adapters	210 mm
Handle diameter	35 mm
static loading capacity	50 Kg

More

SUPER PUMP IRON BARBELL - Code 1660/1

WEIGHT	1.5 Kg
Total length	1320 mm
diameter load adapters	28 mm
length load adapters	210 mm
Handle diameter	28 mm
static loading capacity	50 Kg

More